MACJAMES® MULTISURFACE DEGREASER / CLEANER (NAFDAC Reg. No:02-8179L)
This is an emulsifying non-solvent based degreaser surfactant cleaner. It emulsifies grease, oil, rust and heavy dirt and cleanses them from the surface (metal, plastic or rubber) without deforming them (substrates). It is used where acid, highly alkaline and solvent-based degreasers are found to be destructive and inefficient. It is used in degreasing machine parts, car engines, heat exchangers, workshop, machines, tanks, reservoirs and other heavily soiled areas or equipment. It could be carefully used for rugs and upholstery, and thick fabrics cleaning.
Packaging: 1 litre,4/25/30/200 litres plastic containers (others on request).
Solvent-based degreaser is also available in any HDPE (plastic) packaging or metal drums.
MACJAMES® MUILTIPURPOSE LIQUID DETERGENT (NAFDAC Reg.No.:02-8178L)
This is a surface active environmentally friendly multi-purpose liquid detergent (containing ionic and non ionic surfactants) and other additives for its general purpose use in laundry, kitchen, toilets, steam washing, power washing, all floor types and coverings, cars and machines, rig and super structures, vessels and storage tanks, silos, etc
It has PH of 7.00 – 8.0
Does not affect physical properties of substrates and is not poisonous.
It is blendable with solvent, disinfectant, salt /fresh and hard/soft water.
It has anti-depository agent and easily washed off.
Packaging:500ml,1litre,4/25/30/200 litres, in HDPE (plastic) container.
Other packaging as requested.
RIG WASH / INDUSTRIAL DETERGENT
This is an environmentally friendly and non-corrosive chemical cleaner liquid detergent. It has emulsifying effects and is non toxic. Its PH is 7.5- 9.5. It is blendable in acid, alkaline, hard and soft water media. It could be used in hand, power and steam washing activities in appropriate ratio to water in these areas:
Production and factory floors
Drilling rig and platforms
Vessels and silos
Workshop and machine parts
Petro-chemical and refineries, etc.
Packaging: steel and HDPE drums and kegs (20 – 200litres)
ALKYD, EPOXY, POLYURETHANE AND ZINC SILICATE THINNERS:
These are thinners used in thinning coating chemicals / paints.
Alkyd thinner is a blend of solvents for thinning alkyd paint coatings for achieving flow ability, spread ability, required film thickness and dry time.
Epoxy thinner is a blend of solvents for thinning epoxy coatings/ chemicals to achieve desired coating properties.
Polyurethane thinner is blend of solvents for thinning polyurethane paints.
Zinc Silicate thinner is used for thinning zinc silicate coating blends.Packaging: 4 litres – 20 litres HDPE or metal drums (other on request).
DUAL PURPOSE THINNERS / TOOL’S CLEANERS:
This is a blend of pure solvents use for degreasing, de-oiling and flushing of tools, hoses used for painting and greasing, and also for spray painting, lubrication, oiling and electroplating, etc equipment. It may also serve as thinner for epoxies and likes.
Packaging: 4 litres – 200 litres HDPE or metal drum.
RUST EXIT, PAINT REMOVER AND METAL BRIGHTNER:
RUST-EXIT is a slightly viscous liquid of phosphoric acid and other surface active agents (surfactants) as emulsifier and wetting agent. It contains rust inhibiting compounds which prevent the cleaned surface from getting rusted over a given time.
PAINT REMOVER removes stains, rust, paints, from metals and leaves them cleaned to allow for immediate painting or surface coating application of treated metals surfaces.
METAL BRIGHTENER removes all surface contaminants, dirt and dulling soils then brightens and polishes the metals surface (substrates).Packaging: 4 litres – 50 litres in HDPE container, others on request.